Wind River's SBCPowerQUICC II reference design is a 6U CompactPCI card that enables you to begin project development before your own custom design is available. The board offers a solid platform for hardware and software engineers to use in evaluating and prototyping designs that closely parallel their final applications. The SBCPowerQUICC II also gives software engineers a live target on which to begin developing and testing application code.
The SBCPowerQUICC II reference design comes complete with detailed schematics, a Bill of Materials, VxWorks and Linux board support packages, user documentation, a protective Plexiglas enclosure, a single slot CompactPCI backplane, and a power supply to provide you with a turnkey basis for your own custom design.
In addition, the SBCPowerQUICC II comes standard with 256MB of SDRAM mounted on a SODIMM and connected to the 60x bus running up to 100MHz, 64MB of flash memory mounted on a SIMM and 2MB on-board flash (both connected to the 60x bus via address latches and data buffers), and 16MB of SDRAM connected to the local bus.
The SBCPowerQUICC II also comes with three 10/100BaseT Ethernet ports using the PowerQUICC II's FCC1, FCC2, and FCC3 MIIs interfaced with Broadcom BCM5221 PHYs and RJ45 connectors.
Also standard are two three-wire RS-232 ports using the PowerQUICC II's SMC1 and SMC2 in UART mode, one 10BaseT Ethernet port using SCC1 on the PowerQUICC II with an LXT905 transceiver and RJ45 connector, a 16-pin JTAG interface connection, an external real-time clock with 8KB NvRAM, 8KB EEPROM, an Intel i8259A interrupt controller, a PCI rev 2.2-compliant 32-bit PMC/PPMC slot, and basic hot swap capability using SMH4042 hot swap controller and the Tundra Tsi310 PCI to PCI-X bridge.
Features
- One of the following Freescale PowerQUICC II CPUs*:
- MPC8260 up to 300MHz core/200MHz CPM/66MHz bus
- MPC8265 up to 300MHz core/200MHz CPM/66MHz bus (83MHZ bus speeds also available for MPC8260 and MPC8265)
- MPC8270 up to 450MHz core/300MHz CPM/100MHz bus
- MPC8280 up to 450MHz core/300MHz CPM/100MHz bus
- CompactPCI 6U double height form factor
- The following memory systems are connected to the 60x bus:
- 256MB SDRAM SODIMM (user-expandable up to 512MB page based interleaving only)
- 64MB SIMM flash
- 2MB on-board flash
- The following memory system is connected to the local bus:
- 16MB SDRAM
- Real-time clock w/8KB NvRAM using the ST M48T59Y
- 8Kb EEPROM
- Intel i8259A interrupt controller
- Support for the following PowerQUICC II peripherals:
- PCI controller (3.3v 32-bit PCI bus up to 66MHz)
- Memory controller (up to 100MHz memory bus)
- Interrupt controller and timers
- Up to three 10/100 BaseT internal Ethernet MAC interfaces using RJ45 connectors
- Up to one 10BaseT internal Ethernet MAC interface using RJ45 connectors
- Two RS-232 interfaces using Mini-DB9 connectors
- Hard reset via a momentary switch
- Memory-mapped seven-segment display
- JTAG debug connection
- 32-bit 33/66MHz PMC/PPMC slot on-board
- Basic hot swap capability using a SMH4042 hot swap controller and a Tundra Tsi310PCI to PCI-X bridge
- Mailbox connector
- MPC185 security processor**
* To inquire about support for other PowerQUICC II CPU variants, please contact your local Wind River representative.
**To check availability, please contact your local Wind River representative.
Benefits
- Experienced support
- Free detailed schematics
- Accelerated early development
- Emulators for turnkey development
- Tools integration
- Board support packages
